#Model-F150XSA
Yamaha F150XSA Outboard Motor
25-Inch Shaft | Digital Electronic Control (DEC) | Electric Start | Power Trim & Tilt | Gray
⚠️ Important: This is a DEC engine, so it has to be installed by an authorized Yamaha dealer. Both the engine and control system need to be flashed and configured with Yamaha diagnostic tools. DIY installation isn’t supported for DEC models.
The Yamaha F150XSA is a 150-horsepower outboard built for boaters who want smooth digital control and the reliable performance Yamaha’s 2.8-liter platform is known for. With a 25-inch shaft, electric start, power trim & tilt, and Yamaha’s Digital Electronic Control system, this model gives you clean throttle response, effortless shifting, and refined handling on the water. It’s a popular choice for bay boats, offshore center consoles, pilothouse boats, and multipurpose rigs that need dependable power and easy operation.
Its 2.8L inline-four runs quietly, starts easily, and offers excellent fuel economy thanks to Yamaha’s EFI system. Combined with corrosion-resistant hardware and Yamaha’s durable Gray marine finish, the F150XSA is built to handle regular saltwater or freshwater use.
Key Features
-
150 Horsepower, 2.8L Inline 4-Cylinder 4-Stroke Engine-Strong, efficient power that holds up well for long days on the water.
-
Digital Electronic Control (DEC)-Smooth, precise electronic throttle and shifting with no mechanical cables.
-
25-Inch Shaft Length-Made for higher transoms found on offshore-capable boats.
-
Electric Start-Push-button ignition for consistent, easy starts.
-
Power Trim & Tilt-Fine-tune running angle for speed, efficiency, or shallow-water access.
-
Gray Finish-Yamaha’s classic corrosion-resistant paint for lasting protection.
-
Electronic Fuel Injection (EFI)-Reliable cold starts, steady throttle response, and better fuel economy.
-
Lightweight Class Leader-Offers strong performance without extra weight on the transom.
Frequently Asked Questions
Q: What makes DEC different from mechanical controls?
A: DEC uses electronic signals instead of cables, giving smoother throttle and shifting with less effort and no cable friction.
Q: Can I install this motor myself?
A: No. DEC motors must be installed and programmed by a Yamaha dealer.
Q: What boats is the F150XSA best suited for?
A: Offshore center consoles, bay boats, pilothouse boats, and cruisers that use a 25-inch transom.
#Model-LF150XSA
Yamaha LF150XSA Outboard Motor
25-Inch Shaft | Digital Electronic Control (DEC) | Electric Start | Power Trim & Tilt | Counter-Rotation | Gray
⚠️ Important: Because this is a DEC motor, installation has to be handled by an authorized Yamaha dealer. The engine and its control system need to be programmed using Yamaha diagnostic tools, so it’s not something that can be installed at home.
The Yamaha LF150XSA is the counter-rotating version of the F150XSA, built for boats that run twin engines and need better balance and cleaner tracking. With 150 horsepower, a 25-inch shaft, and Yamaha’s DEC system, this model gives you smooth throttle response and effortless shifting, especially helpful when docking or working through tight channels. When paired with a standard-rotation engine, the counter-rotation helps reduce helm pull and makes the boat feel more settled in rougher conditions.
It’s powered by Yamaha’s 2.8L inline-four, a fuel-efficient and quiet-running engine known for dependable acceleration and strong mid-range performance. The Gray marine finish and corrosion-resistant design make it a solid option for boats that spend plenty of time in saltwater.
Key Features
-
150 Horsepower, 2.8L Inline 4-Cylinder 4-Stroke Engine-Reliable power with good efficiency and clean mid-range performance.
-
Counter-Rotation-Helps balance steering forces and improves handling in twin-engine setups.
-
Digital Electronic Control (DEC)-Smooth, cable-free throttle and shifting with quick response.
-
25-Inch Shaft Length-Sized for higher transoms commonly found on offshore boats.
-
Electric Start-Simple push-button ignition for quick starts.
-
Power Trim & Tilt-Makes it easy to adjust the running angle for performance or shallow water.
-
Gray Finish-Durable Yamaha coating designed to stand up to saltwater use.
-
Electronic Fuel Injection (EFI)-Cleaner starts, better throttle feel, and improved fuel efficiency.
- Frequently Asked Questions
Q: What’s the main benefit of counter-rotation?
A: It reduces helm pull and helps the boat track straighter when running twin engines.
Q: Can the LF150XSA be used alone as a single engine?
A: It can, but it’s mainly intended to pair with a standard-rotation F150 in twin setups.
Q: Does it work with Yamaha Helm Master EX?
A: Yes—when rigged with the correct Yamaha components.
#Model-F150XSA2
Yamaha F150XSA2 Outboard Motor
25-Inch Shaft | Digital Electronic Control (DEC) | Electric Start | Power Trim & Tilt | Pearl White
⚠️ Important: Because this is a DEC model, it must be installed by an authorized Yamaha dealer. The motor and its control system need to be programmed with Yamaha diagnostic tools, so it isn’t a DIY install.
The Yamaha F150XSA2 blends Yamaha’s smooth, digital throttle control with the clean look of a Pearl White finish. It delivers 150 horsepower through a 25-inch shaft and includes power trim & tilt, electric start, and the refined feel that comes with Yamaha’s DEC system. This model is a great fit for bay boats, center consoles, pilothouse designs, or any setup that benefits from precise throttle response and clean shifting.
At its core is Yamaha’s 2.8-liter inline-four, a fuel-efficient engine known for strong mid-range power, quiet running, and reliable cold starts thanks to EFI. The Pearl White finish gives the motor a premium appearance, and Yamaha’s corrosion protection helps it hold up in both fresh and saltwater.
Key Features
-
150 Horsepower, 2.8L Inline 4-Cylinder 4-Stroke Engine-Efficient, smooth power with a strong mid-range feel.
-
Digital Electronic Control (DEC)-Provides clean, cable-free throttle and shift control.
-
25-Inch Shaft Length-Fits deeper, offshore-capable transoms.
-
Electric Start-Push-button ignition for quick and easy starting.
-
Power Trim & Tilt-Helps set the running angle for speed, efficiency, or shallow water.
-
Pearl White Finish-A premium color option with Yamaha’s durable marine coating.
-
Electronic Fuel Injection (EFI)-Reliable cold starts, smoother throttle response, and better fuel economy.
-
Lightweight Class Leader-Offers strong performance without adding unnecessary weight.
Frequently Asked Questions
Q: How is the F150XSA2 different from the F150XSA?
A: The A2 version includes updated styling and refinements but keeps the same core performance.
Q: Is the F150XSA2 compatible with Helm Master EX?
A: Yes—when rigged with the proper Yamaha components.
Q: Can I install this myself?
A: No. DEC engines require dealer setup and programming to operate correctly.
#Model-LF150XSA2
Yamaha LF150XSA2 Outboard Motor
25-Inch Shaft | Digital Electronic Control (DEC) | Electric Start | Power Trim & Tilt | Counter-Rotation | Pearl White
⚠️ Important: This is a DEC engine, so installation must be handled by an authorized Yamaha dealer. Both the engine and the DEC system need to be flashed and set up with Yamaha diagnostic tools.
The Yamaha LF150XSA2 is the counter-rotating partner to the F150XSA2, built for boats running twin engines where balance, steering control, and smooth handling really matter. It delivers 150 horsepower, uses a 25-inch shaft, and features Yamaha’s Digital Electronic Control system for clean throttle inputs and effortless shifting. Paired with a standard-rotation engine, this model helps reduce helm pull and keeps the boat tracking straighter offshore or in tight channels.
Like its standard-rotation counterpart, it’s powered by Yamaha’s 2.8L inline-four with EFI—a dependable setup known for strong mid-range torque, efficient fuel use, and quiet, refined operation. The Pearl White finish gives the motor a premium look and benefits from Yamaha’s corrosion protection for long-lasting durability on saltwater boats.
Key Features
-
150 Horsepower, 2.8L Inline 4-Cylinder 4-Stroke Engine-Reliable power with smooth, efficient mid-range performance.
-
Counter-Rotation-Helps balance thrust and reduce steering pull in twin-engine configurations.
-
Digital Electronic Control (DEC)-Cable-free throttle and shift control with clean, precise response.
-
25-Inch Shaft Length-Ideal for offshore-capable hulls with higher transoms.
-
Electric Start-Push-button convenience for quick, easy starting.
-
Power Trim & Tilt-Adjust the motor angle for performance, efficiency, or shallow-water maneuvering.
-
Pearl White Finish-Stylish, durable coating designed to complement premium boats.
-
Electronic Fuel Injection (EFI)-Reliable starts, better throttle response, and improved fuel economy.
Frequently Asked Questions
Q: Why choose the LF150XSA2 instead of the F150XSA2?
A: The LF model spins in the opposite direction, which is essential for balanced handling in twin-engine setups.
Q: Is it compatible with Yamaha Helm Master EX?
A: Yes—it works with Helm Master EX when rigged with the correct Yamaha components.
Q: Can it be used as a single engine?
A: It can, but it’s primarily designed to pair with a standard-rotation engine on twin rigs.
#Model-F150XSA4
Yamaha F150XSA4 Outboard Motor
25-Inch Shaft | Digital Electronic Control (DEC) | Electric Start | Power Trim & Tilt | Classic White
⚠️ Important: This is a DEC engine, so installation has to be done by an authorized Yamaha dealer. The engine and DEC system must be programmed using Yamaha diagnostic tools.
The Yamaha F150XSA4 is a 150-horsepower outboard that combines Yamaha’s smooth digital throttle and shift system with a clean Classic White finish. With a 25-inch shaft, electric start, and power trim & tilt, it’s built for boaters who want precise control and a premium look. This model works well on bay boats, pilothouse hulls, offshore center consoles, and any setup needing reliable power along with modern digital controls.
Under the cowling is Yamaha’s 2.8-liter inline-four with EFI—a dependable engine known for crisp acceleration, quiet running, and excellent fuel economy. The Classic White coating gives the motor a refined appearance, and Yamaha’s corrosion protection is designed to handle constant time in saltwater or freshwater.
Key Features
-
150 Horsepower, 2.8L Inline 4-Cylinder 4-Stroke Engine-Smooth, efficient power with strong mid-range torque.
-
Digital Electronic Control (DEC)-Precise, cable-free throttle and shift operation for easy handling.
-
25-Inch Shaft Length-Fits higher transoms and offshore-ready boats.
-
Electric Start-Push-button convenience for consistent starts.
-
Power Trim & Tilt-Adjust the running angle for speed, efficiency, or shallow-water operation.
-
Classic White Finish-Clean, modern styling with Yamaha’s corrosion-resistant marine coating.
-
Electronic Fuel Injection (EFI)-Reliable starts, smooth throttle feel, and efficient fuel delivery.
Frequently Asked Questions
Q: What’s new in the A4 version?
A: The A4 release includes minor refinements and updated production details while keeping the same performance specs.
Q: Is the F150XSA4 compatible with Helm Master EX?
A: Yes—when rigged with Yamaha’s compatible Helm Master EX components.
Q: Can I install this outboard myself?
A: No. DEC engines must be programmed and installed by an authorized Yamaha dealer to operate correctly.
#Model-LF150XSA4
Yamaha LF150XSA4 Outboard Motor
25-Inch Shaft | Digital Electronic Control (DEC) | Electric Start | Power Trim & Tilt | Counter-Rotation | Classic White
⚠️ Important: This is a DEC engine, and it must be installed by an authorized Yamaha dealer. Both the engine and the DEC system require programming with Yamaha diagnostic tools, so it isn’t designed for DIY installation.
The Yamaha LF150XSA4 is the counter-rotating version of the F150XSA4, built for twin-engine rigs that need better balance, improved tracking, and smoother handling. It produces 150 horsepower through Yamaha’s 2.8-liter inline-four, and paired with DEC controls, you get clean throttle response and effortless shifting. The Classic White finish gives it a polished look, making it a popular choice for premium center consoles and offshore setups.
This motor is designed to work alongside a standard-rotation engine to reduce helm pull and keep the boat running straighter in rough water or at low speeds. Yamaha’s EFI system helps it start cleanly, run smoothly, and stay fuel-efficient. The corrosion-resistant construction makes it well suited for both fresh and saltwater use.
Key Features
-
150 Horsepower, 2.8L Inline 4-Cylinder 4-Stroke Engine-Reliable mid-range power with strong acceleration and efficient operation.
-
Counter-Rotation-Improves stability and reduces steering torque in twin-engine configurations.
-
Digital Electronic Control (DEC)-Cable-free throttle and shifting with smooth, predictable response.
-
25-Inch Shaft Length-Great for boats with higher, offshore-style transoms.
-
Electric Start-Push-button ignition for quick and easy starts.
-
Power Trim & Tilt-Adjust your running angle for performance, efficiency, or shallow-water access.
-
Classic White Finish-Clean, timeless Yamaha styling with corrosion protection built in.
-
Electronic Fuel Injection (EFI)-Better cold starts, smoother acceleration, and improved fuel economy.
Frequently Asked Questions
Q: Why choose the LF150XSA4 over the F150XSA4?
A: The LF model spins in the opposite direction, which helps balance steering forces in a twin-engine setup.
Q: Is the LF150XSA4 compatible with Helm Master EX?
A: Yes—when rigged with the proper Yamaha components.
Q: Can it be used as a single engine?
A: It can, though it’s primarily intended to run alongside a standard-rotation motor.
#Model-F150XHA
Yamaha F150XHA Outboard Motor
25-Inch Shaft | Mechanical Control | Tiller Handle | Electric Start | Power Trim & Tilt | Gray
The Yamaha F150XHA brings together Yamaha’s long-standing reputation for reliability with the simplicity of mechanical controls and the hands-on feel of a tiller handle. With 150 horsepower, a 25-inch shaft, and power trim & tilt, this model works well for a wide range of boats—offshore center consoles, bay boats, and versatile work or fishing setups that benefit from direct, tiller-based control.
At the heart of the engine is Yamaha’s 2.8-liter inline-four with EFI, known for clean starts, strong acceleration, and efficient cruising. The Gray marine finish, combined with Yamaha’s corrosion-resistant hardware, makes it dependable whether you’re running in saltwater or freshwater.
Key Features
-
150 Horsepower, 2.8L Inline 4-Cylinder 4-Stroke Engine-Smooth, fuel-efficient power for a variety of boating needs.
-
Mechanical Control-Simple, proven throttle and shift using a cable-based system.
-
Tiller Handle-Provides direct steering feel and easy control from the transom.
-
25-Inch Shaft Length-Great for boats with higher transoms or offshore-ready hulls.
-
Electric Start-Push-button ignition for consistent, reliable starting.
-
Power Trim & Tilt-Adjust the engine angle for running, docking, or shallow-water access.
-
Gray Finish-Durable Yamaha marine coating built for long-term corrosion resistance.
-
Electronic Fuel Injection (EFI)-Crisp throttle response, efficient fuel delivery, and dependable cold starts.
Frequently Asked Questions
Q: How does the F150XHA differ from DEC models?
A: The F150XHA uses mechanical controls instead of Yamaha’s Digital Electronic Control system, giving it a simpler, cable-based setup.
Q: Is this motor suitable for offshore use?
A: Yes—the 25-inch shaft and Yamaha’s corrosion-resistant design make it a solid choice for offshore boats.
Q: Can it be used with Yamaha’s digital gauges?
A: Yes, it’s compatible with Yamaha digital instrumentation for engine monitoring.
#Model-F150LD
Yamaha F150LD Outboard Motor
20-Inch Shaft | Mechanical Control | Electric Start | Power Trim & Tilt | Gray
The Yamaha F150LD is a versatile 150-horsepower outboard built for boats that need strong, reliable performance without the complexity of digital controls. With a 20-inch shaft and Yamaha’s proven mechanical throttle and shift system, it’s a great match for bay boats, center consoles, and all-around family or fishing rigs that run inshore or nearshore waters. The F150 platform has a long reputation for durability, and this model sticks to that formula with simple rigging, easy operation, and dependable day-to-day performance.
Powered by a 2.8-liter inline-four with EFI, the F150LD offers crisp acceleration, smooth throttle feel, and excellent fuel economy. Yamaha’s Gray marine finish, combined with corrosion-resistant hardware, makes it equally comfortable in saltwater or freshwater environments.
Key Features
-
150 Horsepower, 2.8L Inline 4-Cylinder 4-Stroke Engine-Strong and efficient power suitable for a wide range of boats.
-
Mechanical Control-Straightforward cable-driven throttle and shift for easy maintenance.
-
20-Inch Shaft Length-Built for boats with lower transoms—ideal for bay and inshore applications.
-
Electric Start-Simple push-button ignition for reliable starting.
-
Power Trim & Tilt-Helps adjust the engine angle for performance, efficiency, or shallow-water running.
-
Gray Finish-Yamaha’s corrosion-resistant marine coating for long-lasting durability.
-
Electronic Fuel Injection (EFI)-Smooth starts, clean throttle response, and better fuel economy.
Frequently Asked Questions
Q: How does the F150LD differ from the F150XHA?
A: The main difference is shaft length—F150LD uses a 20-inch shaft, while the F150XHA uses a 25-inch shaft.
Q: Is the F150LD suitable for offshore use?
A: It can be, but the 20-inch shaft is better suited for bay, inshore, and nearshore boats.
Q: Does it work with Yamaha digital gauges?
A: Yes. It can be paired with Yamaha digital monitoring systems.
#Model-F150XD
Yamaha F150XD Outboard Motor
25-Inch Shaft | Mechanical Control | Electric Start | Power Trim & Tilt | Gray
The Yamaha F150XD is a straightforward 150-horsepower outboard built for boaters who want something reliable and easy to run. With a 25-inch shaft and mechanical controls, it’s a solid match for offshore center consoles, bay boats, and multipurpose rigs that don’t need digital controls. It follows the same reputation the F150 lineup has earned for years—simple to maintain, strong on the water, and dependable season after season.
The 2.8-liter inline-four engine uses EFI for clean starts and smooth throttle response, whether you’re cruising or running in choppier conditions. Yamaha’s Gray marine finish and corrosion-resistant design help it stand up to saltwater use, making it a great choice for boaters who spend a lot of time out on the water.
Key Features
-
150 Horsepower, 2.8L Inline 4-Cylinder 4-Stroke Engine-Consistent power with good acceleration and fuel efficiency.
-
Mechanical Control-Simple cable-driven throttle and shift-easy to rig and easy to maintain.
-
25-Inch Shaft Length-Designed for higher transoms and offshore-capable hulls.
-
Electric Start-Push-button starting that fires up reliably.
-
Power Trim & Tilt-Lets you adjust the engine angle for performance or shallow-water operation.
-
Gray Finish-Durable Yamaha coating designed to resist corrosion.
-
Electronic Fuel Injection (EFI)-Smooth running, crisp throttle feel, and dependable starts.
Frequently Asked Questions
Q: How is the F150XD different from the F150XHA?
A: They’re both mechanical 25-inch models—the “XD” label just marks a different configuration or production variation.
Q: Is this motor good for offshore use?
A: Yes. The 25-inch shaft and corrosion-resistant design make it a strong offshore choice.
Q: Can it be paired with Yamaha’s digital gauges?
A: Yes, it works with Yamaha’s digital instrumentation systems.
#Model-LF150XD
Yamaha LF150XD Outboard Motor
25-Inch Shaft | 2.7-Liter Inline 4 | Counter-Rotating | Remote Mechanical Control | Electronic Fuel Injection | Electric Start | Power Trim & Tilt | Gray
The Yamaha LF150XD is the counter-rotating version of Yamaha’s 150HP mechanical-control lineup, built for boats running twin engines or setups that need better balance and cleaner tracking. With a 25-inch shaft, electric start, power trim & tilt, and remote mechanical controls, this motor gives boaters simple, reliable operation with the added stability that counter-rotation provides.
It’s powered by Yamaha’s 2.7-liter inline-four platform, a proven design known for smooth acceleration, quiet running, and strong fuel economy. With EFI and Yamaha’s corrosion-resistant construction, the LF150XD handles both freshwater and saltwater use without fuss, making it a dependable option for larger skiffs, center consoles, offshore twins, and mixed-use recreational boats.
Key Features
-
Horsepower: 150 HP four-stroke-Delivers solid mid-range punch with efficient cruising.
-
Engine Type: 2.7L Inline 4-Cylinder-Quiet, fuel-friendly operation with dependable Yamaha engineering.
-
Rotation: Counter-Rotating-Balances handling and reduces helm pull in twin-engine setups.
-
Shaft Length: 25 Inches-Fits a wide range of high-transom and offshore-ready hulls.
-
Control Type: Remote Mechanical-Cable-driven throttle and shift for simple, predictable control.
-
Starting System: Electric Start-Push-button ignition that fires up reliably.
-
Trim & Tilt: Power Trim & Tilt-Easy adjustment for performance, shallow water, or trailering.
-
Fuel Delivery: Electronic Fuel Injection (EFI)-Clean starts, smooth throttle response, and improved fuel efficiency.
-
Alternator Output: 35 amps-Plenty of charging power for electronics and accessories.
-
Maximum RPM Range: 5000–6000 RPM-Flexible performance for cruising, planning, or running wide open.
-
Approximate Weight: 487 lbs-A solid balance of power and manageable weight.
-
Color: Gray-Yamaha’s corrosion-resistant marine coating for long service life.
The Yamaha LF150XD delivers dependable power, stable handling, and long-term efficiency—making it a smart pick for twin-engine offshore boats, larger center consoles, or any setup that benefits from counter-rotation.
Frequently Asked Questions
Q: What makes the LF150XD different from the F150XD?
A: The LF150XD spins the opposite direction, balancing thrust and steering feel in twin-engine installations.
Q: Does this outboard include power trim & tilt?
A: Yes—power trim & tilt is standard for easy operation and improved performance.
Q: What control system does it use?
A: The LF150XD uses Yamaha’s remote mechanical controls for simple, reliable throttle and shift operation.
#Model-F150JC
Yamaha F150JC Outboard Motor
25-Inch Shaft | Mechanical Control | Electric Start | Power Trim & Tilt | Gray
The Yamaha F150JC is a straightforward, dependable 150HP outboard for boaters who want solid performance without going digital. With a 25-inch shaft, mechanical throttle and shift, and power trim & tilt, it’s a strong match for offshore center consoles, bay boats, and mixed-use fishing rigs. The F150 family has a long reputation for reliability, and this version stays true to that—easy to rig, easy to run, and built to last.
Under the cowling is Yamaha’s 2.8-liter inline-four with EFI, a platform known for quick starts, smooth throttle response, and good fuel economy. The Gray marine finish and corrosion protection help it stand up to both freshwater and saltwater use, even for boaters who rack up a lot of hours each season.
Key Features
-
150 Horsepower, 2.8L Inline 4-Cylinder 4-Stroke Engine-Strong, efficient mid-range power with dependable day-to-day performance.
-
Mechanical Control-Simple cable-driven throttle and shift for easy maintenance.
-
25-Inch Shaft Length-Made for boats with higher transoms and offshore-ready hulls.
-
Electric Start-Push-button ignition that fires up reliably.
-
Power Trim & Tilt-Adjust the running angle for speed, shallow water, or trailering.
-
Gray Finish-Durable Yamaha coating that resists corrosion in harsh conditions.
-
Electronic Fuel Injection (EFI)-Smooth, efficient operation with clean starts and steady throttle feel.
Frequently Asked Questions
Q: How does the F150JC differ from the F150XD?
A: Both use mechanical controls and a 25-inch shaft—“JC” simply marks a different configuration or production update.
Q: Is the F150JC saltwater-ready?
A: Yes. Yamaha’s marine coating and corrosion-resistant design make it a reliable saltwater motor.
Q: Can this engine be paired with Yamaha digital gauges?
A: Yes, it works with Yamaha’s digital gauge systems.
